Performance Improvement of Air-cooled Battery Thermal Management System using Sink of Different Pin-Fin Shapes
Abstract
Doi: 10.28991/ESJ-2022-06-04-013
Full Text: PDF
Keywords
References
Mohammadian, S. K., & Zhang, Y. (2015). Thermal management optimization of an air-cooled Li-ion battery module using pin-fin heat sinks for hybrid electric vehicles. Journal of Power Sources, 273, 431–439. doi:10.1016/j.jpowsour.2014.09.110.
Behi, H., Behi, M., Karimi, D., Jaguemont, J., Ghanbarpour, M., Behnia, M., Berecibar, M., & Van Mierlo, J. (2021). Heat pipe air-cooled thermal management system for lithium-ion batteries: High power applications. Applied Thermal Engineering, 183. doi:10.1016/j.applthermaleng.2020.116240.
Sun, J., Li, J., Zhou, T., Yang, K., Wei, S., Tang, N., Dang, N., Li, H., Qiu, X., & Chen, L. (2016). Toxicity, a serious concern of thermal runaway from commercial Li-ion battery. Nano Energy, 27, 313–319. doi:10.1016/j.nanoen.2016.06.031.
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016). A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles. Renewable and Sustainable Energy Reviews, 64, 106–128. doi:10.1016/j.rser.2016.05.033.
Miranda, Á. G., & Hong, C. W. (2013). Integrated modeling for the cyclic behavior of high power Li-ion batteries under extended operating conditions. Applied Energy, 111, 681–689. doi:10.1016/j.apenergy.2013.05.047.
Ye, Y., Shi, Y., & Tay, A. A. O. (2012). Electro-thermal cycle life model for lithium iron phosphate battery. Journal of Power Sources, 217, 509–518. doi:10.1016/j.jpowsour.2012.06.055.
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009). An alternative cooling system to enhance the safety of Li-ion battery packs. Journal of Power Sources, 194(2), 1105–1112. doi:10.1016/j.jpowsour.2009.06.074.
Saw, L. H., Ye, Y., Yew, M. C., Chong, W. T., Yew, M. K., & Ng, T. C. (2017). Computational fluid dynamics simulation on open cell aluminium foams for Li-ion battery cooling system. Applied Energy, 204, 1489–1499. doi:10.1016/j.apenergy.2017.04.022.
Mohammadian, S. K., & Zhang, Y. (2017). Cumulative effects of using pin fin heat sink and porous metal foam on thermal management of lithium-ion batteries. Applied Thermal Engineering, 118, 375–384. doi:10.1016/j.applthermaleng.2017.02.121.
Peng, X., Cui, X., Liao, X., & Garg, A. (2020). A thermal investigation and optimization of an air-cooled lithium-ion battery pack. Energies, 13(11), 2956. doi:10.3390/en13112956.
Chen, K., Chen, Y., She, Y., Song, M., Wang, S., & Chen, L. (2020). Construction of effective symmetrical air-cooled system for battery thermal management. Applied Thermal Engineering, 166, 114679. doi:10.1016/j.applthermaleng.2019.114679.
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013). A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles. Journal of Power Sources, 238, 301–312. doi:10.1016/j.jpowsour.2013.03.050.
Liu, Z., Wang, Y., Zhang, J., & Liu, Z. (2014). Shortcut computation for the thermal management of a large air-cooled battery pack. Applied Thermal Engineering, 66(1–2), 445–452. doi:10.1016/j.applthermaleng.2014.02.040.
Chen, K., Wu, W., Yuan, F., Chen, L., & Wang, S. (2019). Cooling efficiency improvement of air-cooled battery thermal management system through designing the flow pattern. Energy, 167, 781–790. doi:10.1016/j.energy.2018.11.011.
Wang, M., Hung, T. C., & Xi, H. (2021). Numerical study on performance enhancement of the air-cooled battery thermal management system by adding parallel plates. Energies, 14(11), 3096. doi:10.3390/en14113096.
Wang, M., Teng, S., Xi, H., & Li, Y. (2021). Cooling performance optimization of air-cooled battery thermal management system. Applied Thermal Engineering, 195, 117242. doi:10.1016/j.applthermaleng.2021.117242.
Liu, Y., & Zhang, J. (2019). Design a J-type air-based battery thermal management system through surrogate-based optimization. Applied Energy, 252, 113426. doi:10.1016/j.apenergy.2019.113426.
Li, X., He, F., & Ma, L. (2013). Thermal management of cylindrical batteries investigated using wind tunnel testing and computational fluid dynamics simulation. Journal of Power Sources, 238, 395–402. doi:10.1016/j.jpowsour.2013.04.073.
Mahamud, R., & Park, C. (2011). Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity. Journal of Power Sources, 196(13), 5685–5696. doi:10.1016/j.jpowsour.2011.02.076.
Giuliano, M. R., Prasad, A. K., & Advani, S. G. (2012). Experimental study of an air-cooled thermal management system for high capacity lithium-titanate batteries. Journal of Power Sources, 216, 345–352. doi:10.1016/j.jpowsour.2012.05.074.
Park, H. (2013). A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles. Journal of Power Sources, 239, 30–36. doi:10.1016/j.jpowsour.2013.03.102.
Qian, Z., Li, Y., & Rao, Z. (2016). Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling. Energy Conversion and Management, 126, 622–631. doi:10.1016/j.enconman.2016.08.063.
Basu, S., Hariharan, K. S., Kolake, S. M., Song, T., Sohn, D. K., & Yeo, T. (2016). Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system. Applied Energy, 181, 1–13. doi:10.1016/j.apenergy.2016.08.049.
Wu, F., & Rao, Z. (2017). The lattice Boltzmann investigation of natural convection for nanofluid based battery thermal management. Applied Thermal Engineering, 115, 659–669. doi:10.1016/j.applthermaleng.2016.12.139.
Patil, M. S., Seo, J. H., Panchal, S., Jee, S. W., & Lee, M. Y. (2020). Investigation on thermal performance of water-cooled Li-ion pouch cell and pack at high discharge rate with U-turn type microchannel cold plate. International Journal of Heat and Mass Transfer, 155, 119728. doi:10.1016/j.ijheatmasstransfer.2020.119728.
Ling, Z., Chen, J., Fang, X., Zhang, Z., Xu, T., Gao, X., & Wang, S. (2014). Experimental and numerical investigation of the application of phase change materials in a simulative power batteries thermal management system. Applied Energy, 121, 104–113. doi:10.1016/j.apenergy.2014.01.075.
Javani, N., Dincer, I., Naterer, G. F., & Rohrauer, G. L. (2014). Modeling of passive thermal management for electric vehicle battery packs with PCM between cells. Applied Thermal Engineering, 73(1), 307–316. doi:10.1016/j.applthermaleng.2014.07.037.
Javani, N., Dincer, I., Naterer, G. F., & Yilbas, B. S. (2014). Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles. International Journal of Heat and Mass Transfer, 72, 690–703. doi:10.1016/j.ijheatmasstransfer.2013.12.076.
Behi, H., Karimi, D., Behi, M., Ghanbarpour, M., Jaguemont, J., Sokkeh, M. A., Gandoman, F. H., Berecibar, M., & Van Mierlo, J. (2020). A new concept of thermal management system in Li-ion battery using air cooling and heat pipe for electric vehicles. Applied Thermal Engineering, 174, 115280. doi:10.1016/j.applthermaleng.2020.115280.
Dan, D., Yao, C., Zhang, Y., Zhang, H., Zeng, Z., & Xu, X. (2019). Dynamic thermal behavior of micro heat pipe array-air cooling battery thermal management system based on thermal network model. Applied Thermal Engineering, 162, 114183. doi:10.1016/j.applthermaleng.2019.114183.
Ye, X., Zhao, Y., & Quan, Z. (2018). Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA). Applied Thermal Engineering, 130, 74–82. doi:10.1016/j.applthermaleng.2017.10.141.
Ye, Y., Saw, L. H., Shi, Y., & Tay, A. A. O. (2015). Numerical analyses on optimizing a heat pipe thermal management system for lithium-ion batteries during fast charging. Applied Thermal Engineering, 86, 281–291. doi:10.1016/j.applthermaleng.2015.04.066.
Tran, T. H., Harmand, S., Desmet, B., & Filangi, S. (2014). Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery. Applied Thermal Engineering, 63(2), 551–558. doi:10.1016/j.applthermaleng.2013.11.048.
Zhang, F., Lin, A., Wang, P., & Liu, P. (2021). Optimization design of a parallel air-cooled battery thermal management system with spoilers. Applied Thermal Engineering, 182, 116062. doi:10.1016/j.applthermaleng.2020.116062.
Wang, N., Li, C., Li, W., Huang, M., & Qi, D. (2021). Effect analysis on performance enhancement of a novel air cooling battery thermal management system with spoilers. Applied Thermal Engineering, 192, 116932. doi:10.1016/j.applthermaleng.2021.116932.
Gu, W. B., & Wang, C. Y. (2000). Thermal-Electrochemical Modeling of Battery Systems. Journal of the Electrochemical Society, 147(8), 2910. doi:10.1149/1.1393625.
Karimi, G., & Li, X. (2013). Thermal management of lithium-ion batteries for electric vehicles. International Journal of Energy Research, 37(1), 13–24. doi:10.1002/er.1956.
Fathabadi, H. (2014). A novel design including cooling media for Lithium-ion batteries pack used in hybrid and electric vehicles. Journal of Power Sources, 245, 495–500. doi:10.1016/j.jpowsour.2013.06.160.
ANSYS. (2010). Introduction to ANSYS Fluent. ANSYS Customer Training Material, 1–59. Available online: https://imechanica.org/files/fluent_13.0_lecture10-transient.pdf (accessed on January 2022).
DOI: 10.28991/ESJ-2022-06-04-013
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 OLANREWAJU Miracle OYEWOLA, TOKUNBO AWONUSI, OLAWALE SAHEED ISMAIL